Order Class 5 and Crushed Stone in Emmons County, ND
North Dakota Rock Supply brings gravel, stone and aggregate delivery in Emmons County, ND to driveways, shop pads and approaches around Linton, Strasburg, Hazelton, Hague, Braddock and Kintyre. Class 5 is the base most of that work starts from.
Each product page carries a calculator, so you can size the load before you order.
This is Missouri Coteau ground: stony, uneven till with pockets of sand and gravel and a great many prairie potholes. Water collects in those closed low spots and sits, which is why a base gets built for the ground it lands on.
Delivery across Emmons County
You order online, pick a quantity by the ton or by the yard, and choose a delivery date at checkout. A dump truck then tips the load on site as one pile.
There is no counter to visit and no pickup.
Quantities are ordered by the ton or by the yard, and the calculator on each product page helps you size the load. Bulk delivery covers Linton, Strasburg, Hazelton, Hague, Braddock, Kintyre and the surrounding countryside.
Materials delivered in Emmons County
Class 5 is the standard North Dakota base gravel. Section 302 of the state specifications names Class 5 as the traffic service aggregate, and Section 816, Table 816-01 sets its gradation alongside Classes 2, 3, 3M, 4, 7, 8 and 13.
Cities and counties write those class numbers into their own street specifications, so it is how material is described and ordered here.
Order Class 5 for driveways, parking pads and shop or shed bases. Order Class 13 when you want a binding, blade-friendly gravel to surface an approach or lane.
Scoria, the red burned-lignite clinker, surfaces paths, yards and parking areas.
Ground conditions across Emmons County
Across the Missouri Coteau the ground is hummocky stagnation moraine, left where stagnant glacier ice melted out on the upland. That means stony, uneven till with pockets of sand and gravel in kames and eskers, and prairie potholes by the thousand.
An under-built base shows up fast on ground like that.
Drainage on the Coteau is unintegrated. The sloughs and potholes are not connected and no stream runs through much of it, so snowmelt and rain collect in closed low spots and drives between the hills stay soft.
Gully cutting on the steep flank of the Missouri Escarpment, wind erosion on exposed hilltops and slumping where saturated till sits on shale all follow from that.
Frost heaves and softens gravel drives, approaches and township roads through the spring thaw, and frost depth is set by the city or county rather than by a statewide table.
Frozen ground stops compaction through the winter, so base and paver work runs from the end of the thaw into late fall, and spring load restrictions slow hauling while the frost comes out.
Choosing the right material
Burleigh County sits on the Missouri Slope, over soft Fort Union sandstone, siltstone, claystone and lignite under a thin soil cover. Swelling clay shows up in places, glacial material is only patchy, and sand and gravel lie on the Missouri River terraces.
That ground differs from Emmons County's till, so a base there has to answer to swelling clay and thin cover rather than to stony moraine and closed potholes.
McIntosh County and Kidder County share Emmons County's ground region. Each is Missouri Coteau stagnation moraine, the same stony, uneven till with sand and gravel pockets and potholes by the thousand.
The ground is the same, so the same base and drainage thinking carries across.
Match the material to the job. Class 5 builds the base under a drive, pad or floor.
Class 13 surfaces an approach or lane where you want a binding gravel. Washed rock and 3/4 inch crushed rock handle drainage, and riprap holds banks and outlets against runoff.
Order Class 5 and aggregate for Emmons County
Class 5 is the base most Emmons County ground asks for, with Class 13 for surfacing and washed rock, riprap and black dirt rounding out the load. Size your quantity with the calculator and place the order online for delivery in Emmons County.
